Ubiquiti PowerBeam M2 airMax Bridge Antenna, 400mm, US (PBE-M2-400-US)

Ubiquiti PBE-M2-400-US PowerBeam M2 400 is a 2.4 GHz, 18 dBi directional wireless bridge. It is designed for outdoor point-to-point links and can extend network connectivity between buildings or remote locations where running cable is impractical.
MSRP: $79.00
Manufacturer: Ubiquiti
SKU: PBE-M2-400-US

Features

  • Incorporating a dish reflector design with advanced technology, the PowerBeam™ is the latest generation of Ubiquiti Networks® airMAX® CPE for cu stomer locations
    Integrated Radio Design
  • InnerFeed® technology integrates the radio into the feed horn of an antenna, so there is no need for cables to connect the radio to the antenna. This improves performance because it eliminates cable losses
  • Plug-and-play Installation – requires no tools for assembly; only a single wrench is required for pole-mounting
  • The form factor of the PowerBeam™ features the highest gain for its size – Excellent beam directivity provides the best performance in high-noise environments
  • Advanced Software Technology, proven in millions of deployments worldwide, exhibiting outstanding performance in outdoor environments. The TDMA airMAX protocol enables unprecedented scalability, high throughput and low latency in unlicensed, multi-point networks
  • Frequency: 2 GHz
  • Throughput: 150+ Mbps
  • Range: 20+ km

Specs

Networking interface (1) 10/100 MbE port
Power method Passive PoE 2-pair (4, 5+; 7, 8 return)
Power supply 24V, 0.5A PoE adapter (Included)
Supported voltage range 20–27V DC
Max. power consumption 6W
ESD/EMP protection Air/contact: ± 24 kV
LEDs (1) Power, (1) LAN, (4) WLAN
Signal strength LEDs Software-adjustable to correspond to custom RSSI levels
Gain 18 dBi
Operating frequency 2405-2475 MHz
Max. VSWR 1.5:1
Channel sizes 5/8/10/20/30/40 MHz
Polarization Dual linear
RoHS compliance Yes
Wind loading 278.4 N @ 120 km/h (63 lbf @ 75 mph)
Wind survivability 120 km/h (75 mph)
Salt fog test IEC 68-2-11 (ASTM B117)
Equivalent: MIL-STD-810 G method 509.5
Vibration test IEC 68-2-6
Temperature shock test IEC 68-2-14
UV test IEC 68-2-5 at 40° C (104° F)
Equivalent: ETS 300 019-1-4
Wind-driven rain test ETS 300 019-1-4
Equivalent: MIL-STD-810 G method 506.5
Enclosure material UV-stabilized plastic
Mounting Pole mount kit (Included)
Ambient operating temperature -40 to 70° C (-40 to 158° F)
Ambient operating humidity 5 to 95% noncondensing
Certifications FCC, IC, CE
NDAA Compliant Yes

 

Dimensions

Size 16.5" x 16.5" x 11.4"
Weight 4 lbs

 

Features

  • Incorporating a dish reflector design with advanced technology, the PowerBeam™ is the latest generation of Ubiquiti Networks® airMAX® CPE for cu stomer locations
    Integrated Radio Design
  • InnerFeed® technology integrates the radio into the feed horn of an antenna, so there is no need for cables to connect the radio to the antenna. This improves performance because it eliminates cable losses
  • Plug-and-play Installation – requires no tools for assembly; only a single wrench is required for pole-mounting
  • The form factor of the PowerBeam™ features the highest gain for its size – Excellent beam directivity provides the best performance in high-noise environments
  • Advanced Software Technology, proven in millions of deployments worldwide, exhibiting outstanding performance in outdoor environments. The TDMA airMAX protocol enables unprecedented scalability, high throughput and low latency in unlicensed, multi-point networks
  • Frequency: 2 GHz
  • Throughput: 150+ Mbps
  • Range: 20+ km