Networking Installation & Accessories

Platinum Tools 100004C EZ-RJ45 Crimp Tool crimps and trims EZ-RJ45 pass-through connectors in a single cycle. Its ratcheted action and built-in cutter support repeatable Cat 5e and Cat 6 cable terminations for professional network installers.

Platinum Tools 100010B is a 100-count box of EZ-RJ45 Cat 6 pass-through connectors. Conductors extend through the front for easier wire-order verification before crimping, helping installers produce consistent Cat 6 Ethernet terminations.

Platinum Tools 100054C EZ-RJPRO HD Crimp Tool is a heavy-duty pass-through RJ45 crimper for professional cable termination. Its high-leverage ratcheted design supports larger Cat 5e and Cat 6 cables while trimming extended conductors during the crimp cycle.

Luxul 10G-CAB-05 is a 0.5 m passive 10 Gigabit direct-attach SFP+ cable for compatible Luxul switches. It provides a plug-and-play, short-run connection for switch stacking or other 10G links without requiring separate fiber transceivers and patch cables.

Luxul 10G-MM-DX-LC is a 10 Gigabit SFP+ multi-mode fiber module with duplex LC connectivity. Designed for compatible Luxul switches, it supports high-speed fiber uplinks and switch-to-switch connections across professional AV and data networks.

Platinum Tools 202010J is a jar of 100 EZ-RJ45 Cat 6 pass-through connectors. The open-end design lets installers verify conductor order before crimping and is intended for use with compatible Platinum Tools EZ-RJ45 crimp systems.

AVPro Edge AC-10G-SFPP-MM is a 10G SFP+ multi-mode fiber transceiver for connecting compatible MXNet equipment and network switches over fiber. Its hot-swappable design supports professional AV-over-IP and high-bandwidth network installations.

On-Q AC3450-50 is a 50-pack of Cat 5e EZ-RJ45 connectors designed for pass-through cable termination. Conductors extend through the connector for easier wire-order verification before crimping, helping installers make consistent field-terminated Ethernet cables.

Ubiquiti AF-5G30-S45 is a 5 GHz, 30 dBi slant-polarized airFiber dish antenna for long-range point-to-point links. It provides higher directional gain for compatible airFiber radios used in extended building-to-building and network backhaul deployments.

Sonos Boost creates a dedicated Sonos wireless mesh network when standard Wi-Fi is unreliable or does not reach every Sonos speaker. It can also extend Sonos coverage between rooms, helping integrators stabilize legacy Sonos installations in challenging network environments.

Ethereal C6T is an 8-pin Cat 6 RJ45 crimp connector supplied in a 50-pack for terminating custom Ethernet cables. It is designed for professional network and AV installations where installers need field-terminated Cat 6 connections.

Ethereal Dual Modular Crimping Tool

Ubiquiti ETH-SP-G2 is an outdoor Ethernet surge protector for network devices exposed to ESD and surge events. It installs inline between Ethernet cables, supports PoE and up to 2.5 GbE data, and is useful for protecting outdoor access points, bridges, and cameras.

Quest NPC-6101 is a 1-foot black Cat 6 UTP patch cable with molded RJ45 plugs and snagless strain relief. It is a short network jumper for patch panels, switches, routers, and other rack-mounted equipment in residential or commercial installations.

Quest NPC-6102 is a 2-foot black Cat 6 UTP patch cable with molded RJ45 plugs and snagless strain relief. Its short length helps keep patch panels, switches, and rack equipment connected with less excess cable inside structured wiring systems.

Quest NPC-6103 is a 3-foot black Cat 6 UTP patch cable with molded RJ45 plugs and snagless strain relief. It provides a clean connection between patch panels, switches, routers, and other network hardware in professional installations.

Quest NPC-6201 is a 1-foot blue Cat 6 UTP patch cable with molded RJ45 plugs and snagless strain relief. The color helps installers identify network paths while the short length suits patch panels, switches, and rack-mounted network equipment.

Quest NPC-6202 is a 2-foot blue Cat 6 UTP patch cable with molded RJ45 plugs and snagless strain relief. It is useful for color-coded rack connections between patch panels, switches, routers, and other Ethernet equipment.

Quest NPC-6203 is a 3-foot blue Cat 6 UTP patch cable with molded RJ45 plugs and snagless strain relief. It provides a color-coded Ethernet jumper for organized patching between network components in professional installations.

Quest NPC-6301 is a 1-foot red Cat 6 UTP patch cable with molded RJ45 plugs and snagless strain relief. Its color makes it useful for identifying specific network paths while connecting patch panels, switches, and other rack equipment.