| Output Power | 2 x 350 WRMS Per Channel @ 4Ω, 8Ω, 70V, 100V (175W at 2Ω) | 230 Watts @ 25V |
| Inputs | 4 Analog | Balanced Inputs with user selectable 26 dB and 34 dB input sensitivity |
| THD+N | 0.1% (20Hz to 20kHz) |
| Frequency Response | +/- 0.5 dB @ 4Ω, 8Ω, 70V, 100V, -2.5dB @ 20kHz at 2Ω |
| Signal to Noise Level | 105dB (20Hz to 20kHz referenced to 8Ω) |
| Crosstalk | 70dB (20Hz to 20kHz) |
| I/O Latency | 1 ms DSP latency under any condition |
| Load Impedance | LowZ down to 2 ohms, 70V direct, and 100V Direct per channel |
| Output Classification | Class D with Proprietary Smart Power Bridge Technology allowing bridged output functionality without sacrificing an amplifier channel |
| DSP Architecture | Analog Devices Sigma 96kHz DSP Processor with 32-bit Core with Sample Rate Converters |
| Input Matrix | Routable matrix; any input to any output with primary and secondary input priority |
| Crossovers | Up to 48 dB/Octave IIR Filters (Linkwitz Riley and Butterworth) and Bessel |
| Parametric EQ | 8 Band Parametric EQ per channel |
| Output Delay | 100ms per channel |
| Output Protection | DC, VHF, and AC Mains Protection, Over-temp and Current Limiter, fan fault detection |
| Network Connectivity | Wi-Fi or 100MB Ethernet with PoE or Built in Wi-Fi Access Point (IEEE 802.11 b/g/n WPA, WPA2, WEP) |
| Operating Systems | MAC, iOS, PC, Android |
