TruAudio Cerasonar Invisible Loudspeaker Full Range 50 RMS

The cerasonar 2525 fit is the largest model within the fit series, combining compact dimensions with increased output capability while remaining completely invisible behind plaster. Developed for residential and commercial applications alike, it delivers natural, balanced sound reproduction with greater headroom for larger rooms and more demanding listening environments.
MSRP: $2160.50
Manufacturer: TruAudio
SKU: CS-2525-FIT

Features

  • Sold as a pair
  • Its larger radiating surface makes the 2525 fit particularly suitable for living rooms, kitchens, hotel rooms, hospitality environments and other architectural spaces where higher output levels are desired without compromising interior design.
  • A unique feature of the cerasonar 2525 fit is its ability to operate in both standard mono (4 Ohm) and single-stereo mode. This allows both left and right audio channels to be reproduced by a single loudspeaker, making it an ideal solution for bathrooms, hotel rooms, corridors and other compact spaces where installing two loudspeakers is impractical. The result is simplified installation, reduced system cost and a more natural listening experience from a single installation point.
  • Engineered for long-term reliability, the 2525 fit is suitable for humid environments including bathrooms, spa and wellness areas, yachts and cruise ships. Carefully selected moisture-resistant materials ensure dependable operation even under demanding environmental conditions.
  • For applications requiring greater low-frequency extension and increased overall dynamics, the cerasonar 4080 sub is the recommended system extension. Together, both products create a remarkably balanced full-range invisible audio solution while maintaining a completely invisible installation.
  • For optimum performance, the cerasonar 2525 fit should be operated with a suitable cerasonar DSP amplifier together with the dedicated cerasonar factory DSP preset. The preset has been specifically developed for the loudspeaker, optimising tonal balance while providing reliable loudspeaker protection without requiring an additional protection unit.
  • Depending on the project requirements, the loudspeaker can be combined with the cerasonar cs-150smart2 streaming DSP amplifier, the cerasonar cs-500dsp4 DSP amplifier or compatible third-party DSP amplifiers from LEA Professional and Powersoft.
  • When operating without a cerasonar DSP preset, the appropriate cerasonar protection unit 50w must be used to ensure safe operation and long-term loudspeaker reliability. For installations using conventional AV receivers or high-power streaming amplifiers, cerasonar recommends the cerasonar protection unit pro 50/100w.

Specs

Drywall 1-layer
SPL 100 dB
Dispersion Range 180° x 180° h./v.
Single Stereo Mode Yes
Power 50W RMS (100W Max)
Frequency Response 80-20kHz
Impedance 4Ω / 2x 8Ω

 

Dimensions

HxWxD 11.38" x 9.96" x 2.11"
Cutout Dimensions 10" x 10"

 

Features

  • Sold as a pair
  • Its larger radiating surface makes the 2525 fit particularly suitable for living rooms, kitchens, hotel rooms, hospitality environments and other architectural spaces where higher output levels are desired without compromising interior design.
  • A unique feature of the cerasonar 2525 fit is its ability to operate in both standard mono (4 Ohm) and single-stereo mode. This allows both left and right audio channels to be reproduced by a single loudspeaker, making it an ideal solution for bathrooms, hotel rooms, corridors and other compact spaces where installing two loudspeakers is impractical. The result is simplified installation, reduced system cost and a more natural listening experience from a single installation point.
  • Engineered for long-term reliability, the 2525 fit is suitable for humid environments including bathrooms, spa and wellness areas, yachts and cruise ships. Carefully selected moisture-resistant materials ensure dependable operation even under demanding environmental conditions.
  • For applications requiring greater low-frequency extension and increased overall dynamics, the cerasonar 4080 sub is the recommended system extension. Together, both products create a remarkably balanced full-range invisible audio solution while maintaining a completely invisible installation.
  • For optimum performance, the cerasonar 2525 fit should be operated with a suitable cerasonar DSP amplifier together with the dedicated cerasonar factory DSP preset. The preset has been specifically developed for the loudspeaker, optimising tonal balance while providing reliable loudspeaker protection without requiring an additional protection unit.
  • Depending on the project requirements, the loudspeaker can be combined with the cerasonar cs-150smart2 streaming DSP amplifier, the cerasonar cs-500dsp4 DSP amplifier or compatible third-party DSP amplifiers from LEA Professional and Powersoft.
  • When operating without a cerasonar DSP preset, the appropriate cerasonar protection unit 50w must be used to ensure safe operation and long-term loudspeaker reliability. For installations using conventional AV receivers or high-power streaming amplifiers, cerasonar recommends the cerasonar protection unit pro 50/100w.