| Output Power |
2 x 350 WRMS Per Channel @ 4Ω, 8Ω, 70V, 100V (175W at 2Ω) | 230 Watts @ 25V |
| Inputs |
4 Analog: Balanced Inputs with user selectable 26 dB and 34 dB input sensitivity |
| THD+N |
0.1% (20Hz to 20kHz) |
| Frequency Response |
+/- 0.5 dB @ 4Ω, 8Ω, 70V, 100V, -2.5dB @ 20kHz at 2Ω |
| Signal to Noise Level |
105dB (20Hz to 20kHz referenced to 8Ω) |
| Crosstalk |
70dB (20Hz to 20kHz) |
| I/O Latency |
1 ms DSP latency under any condition |
| Load Impedance |
LowZ down to 2 ohms, 70V direct, and 100V Direct per channel |
| Output Classification |
Class D with Proprietary Smart Power Bridge Technology allowing bridged output functionality without sacrificing an amplifier channel |
| DSP Architecture |
Analog Devices Sigma 96kHz DSP Processor with 32-bit Core with Sample Rate Converters |
| Input Matrix |
Routable matrix; any input to any output with primary and secondary input priority |
| Crossovers |
Up to 48 dB/Octave IIR Filters (Linkwitz Riley and Butterworth) and Bessel |
| Parametric EQ |
8 Band Parametric EQ per channel |
| Output Delay |
100ms per channel |
| Output Protection |
DC, VHF, and AC Mains Protection, Over-temp and Current Limiter, fan fault detection |
| Network Connectivity |
Wi-Fi or 100MB Ethernet with PoE or Built in Wi-Fi Access Point (IEEE 802.11 b/g/n WPA, WPA2, WEP) |
| Operating Systems |
MAC, iOS, PC, Android |