PAC Select Ford/Lincoln/Mercury Radio Replacement Interface

Name: PAC Select Ford/Lincoln/Mercury Radio Replacement Interface
SKU: C2R-FRD1
Availability: InStock

MSRP: $299.00

Manufacturer: PAC

SKU: C2R-FRD1

Overview

Provides navigation trigger wires and timed accessory output for replacing the factory radio. Retains the factory installed amplified audio system and rear seat entertainment (if equipped). Use with a steering wheel interface module to retain function of all factory controls.
Data controlled:

RAP accessory output wire
Reverse trigger wire
Illumination output wire
Parking brake wire
Vehicle speed sense wire

Retains

Factory 3.5mm jack if equipped
Rear seat entertainment and dual zone audio
Factory-installed amplified audio system
Single wire output for steering wheel control module

Compatibility:

Does not retain SYNC. SYNC retention requires the MS-FRD1
Does not retain steering wheel controls in 2011+ F-series trucks. These vehicles must use the RP4-FD11 for steering wheel control retention.

Vehicle Specific Notes:

2008 F-250/350/450: Not compatible with model trim XL (fleet vehicles). These vehicles do not have the necessary CAN bus signals
2006-2007 Ford Freestyle: Does not retain RSE

RAP accessory output wire
Reverse trigger wire
Illumination output wire
Parking brake wire
Vehicle speed sense wire

Retains

Factory 3.5mm jack if equipped
Rear seat entertainment and dual zone audio
Factory-installed amplified audio system
Single wire output for steering wheel control module

Compatibility:

Does not retain SYNC. SYNC retention requires the MS-FRD1
Does not retain steering wheel controls in 2011+ F-series trucks. These vehicles must use the RP4-FD11 for steering wheel control retention.

Vehicle Specific Notes:

2008 F-250/350/450: Not compatible with model trim XL (fleet vehicles). These vehicles do not have the necessary CAN bus signals
2006-2007 Ford Freestyle: Does not retain RSE