Idatalink Maestro MA2 Plug and Play T-Harness for MA2 Vehicl

• Installation harness used to simplify the installation process of the Maestro ADS-MRR or ADS-MRR2 car radio replacement interface module (sold separately) in select Mazda vehicles when replacing your factory radio 
• Includes a harness that plugs in between the Maestro module, your factory radio’s wiring plugs, and the serial port on your new car stereo
• When plugged in you will retain use of your vehicle’s steering wheel audio controls, factory amplifier, and backup camera with any aftermarket receiver 
• Provides outputs needed for installation of a navigation receiver, and illumination and accessory power outputs 
• This adapter must be used with the iDatalink Maestro ADS-MRR or ADS-MRR2 module in order to connect a new car stereo to your vehicle 

• Vehicle/interface installation harness
• Speaker harness (white connector)
• Speaker harness (red connector)
• Preout harness
• Speaker extension cable

Requires an ADS-MRR or ADS-MRR2 to be installed.