Lutron HVAC Sensor and See Temp

• 7-day programmable schedule
• Select alternate set points to save energy when on vacation or away from home
• Control the temperature from anywhere via seeTemp wall controls, system keypads, your iPad, iPhone, iPod touch, or 3rd-party remote controls and touchscreens

• Power: 
• HVAC Controller: 24 V~ IEC PELV/NEC Class 2
• Wireless Temperature Sensor: 3 V- (one CR2450 battery included)
• Typical Power Consumption: HVAC Controller: 3 W; Test conditions: two LEDs on
• Communications: Lutron Comfort Controls communicate with the system through Radio Frequency (RF) and must be located within 30 ft (9 m) of a repeater. System devices operate on frequencies between 431.0 MHz and 437.0 MHz.
• Mounting:
• HVAC Controller: Mount on flat surface using supplied screws.
• Wireless Temperature Sensor: Adhesive strip provided for temporary mounting and testing. Wall anchor and screw provided for permanent mounting.
• Wired Return Air Duct Sensor: Mount in return air duct using supplied screws.
• Wired Flush Mount Sensor: Surface mount in area to be controlled.
• Wiring:
• HVAC Controller: IEC PELV/NECR Class 2, 22 AWG (0.5 mm2) to 18 AWG (0.75 mm2) solid wiring. Requires transformer common connection.
• Wired Return Air Duct Sensor: IEC PELV/NECR Class 2, 22 AWG (0.5 mm2) to 18 AWG (0.75 mm2) twisted, shielded pair wiring. Maximum wire length is 100 ft (30.5 m).
• Wired Flush Mount Sensor: IEC PELV/NECR Class 2, 22 AWG (0.5 mm2) twisted, shielded pair wiring. Maximum wire length is 100 ft (30.5 m).

• HVAC Controller (White)
• seeTemp Wall Display (°F) (WH)
• -Wireless Temperature Sensor (SW)
• -Wired Return Air Duct Sensor 

Special Order Only